High-Level Project Summary
The product uses a hardware that is Tinkercad to develop different bases that are the ecosystem part (studies plants and life on Mars), main base (crew rest with second floor where a telescope is used to study), and the area of reserve (food reserve, water, oxygen production) where the oxygen vents are black to distribute throughout the base. This project answers the challenge because it has basic needs for astronauts and study. Being something very important for the advancement of humanity and to be able to establish life on Mars studying from a base capable of keeping a crew safe.
Link to Final Project
Link to Project "Demo"
Detailed Project Description
The base what it seeks is to keep a crew safe on Mars with a high duration of water and oxygen so that it allows a long study on Mars of the life of plants and the astronomical study through the telescope where data can be sent through the antenna to the earth. This works with different areas with different objectives to allow this development, the main entrance would have two doors, one at the beginning of the corridor and another at the end to be able to provide a space for oxygen exchange, and to be able to enter to begin the study in the different areas. The benefit is that it could be studied for a longer time on Mars as a way of advancing humanity and studying life on Mars. So to make the design Tinkercard was used to create a basic design.
Space Agency Data
For us the 3D designer is very interesting for that reason we chose this challenge. Our base was inspired by the imagination of each one of us, where we use ARC 3D Models Database
of NASA to be able to carry out the design and know how the different objects that are used are.
-NASA SLS Program Office (2022) 3D Models https://nasa3d.arc.nasa.gov/models
Hackathon Journey
Space apps is a very interesting page since it can give us access to very interesting challenges that the page gives us along with an extensive list of pages to be able to investigate the chosen challenge. Our team chose the challenge of: Equipping a habitat on Mars: a 3D printing challenge. We chose this topic because we found the use of hardware to design a habitat interesting and to be able to print it using 3d printers. Our team did not have any problems or setbacks when working because the project could be carried out in a group to be able to contribute with different ideas for the elaboration of the prototype, we want to thank Ing. Jaime Zagal for supporting us in the design and 3D printing.
References
-3D printer
-Tinkercad app
-Computer
Tags
#Hardware , #baseinmars , #mars , #prototipeofbaseinmars , #ideaofbase , #thinginthefutureonmars